GIGABYTE AORUS 5000S NVMe Gen4 SSD 1TB

Features of GIGABYTE AORUS NVME 5000S GEN4 M.2 SSD 1TB

Form factor: M.2 2280
Interface: PCI-Express 4.0 x4, NVMe 1.3
Total Capacity: 1TB
Sequential Read Speed: Up to 5000MB/s
Sequential write speed: up to 2500MB/s
Wear leveling, over-saving techniques
TRIM & S.M.A.R.T support
Full copper heat diffuser
Warranty: limited to 5 years

Note: 1 GB = 1 billion bytes. Actual usable capacity may vary.
Speeds based on internal testing. Actual performance may vary.
Limited to beta users with PS5 compatible firmware.

The world’s first PCIe 4.0×4 controller from AORUS NVMe Gen4 SSD 1TB

The world’s first PCIe 4.0×4 controller, the Phison PS5016-E16 controller, made by 28nm manufacturing technology. The advanced manufacturing process ensures that the PS5016-E16 has enough computing power for ECC processing when adopting the latest TLC NAND 3D flash. The PS5016-E16 also features eight NAND channels with 32 CE targets, DDR4 DRAM cache, and a PCIe 4.0×4 interface. In terms of features, the chip supports NVMe 1.3 protocol, LDPC error correction, wear and over-thrift technologies to improve the reliability and durability of SSDs.

PCIe 4.0×4 and NVMe 1.3 interface
DDR4 DRAM Cache
8 CH with 32 CEs
Phison 4th Gen LDPC & RAID ECC
pyrite support
heat spreader for controller

NAND Flash is selected for high quality and performance
TOSHIBA BiCS4 96 Layers 3D TLC (800MT/s)

Toshiba BiCS4 NAND Flash improves circuitry and architecture by increasing layers to 96 layers to provide higher storage space per unit area. The 800MT/s transfer rate on an AORUS NVMe Gen 4 SSD far exceeds that of PCIe 3.0×4 hardware for superior storage performance.

AORUS NVMe Gen4 SSD
public SSD

transfer rate
800 metric tons/sec 400 ~ 533 million megatons/sec

AORUS NVMe Gen4 SSD 1TB Xtreme Storage Performance

With the new PCIe 4.0 controller, the AORUS NVMe Gen 4 SSD delivers blazing speeds: up to 5000MB/s for sequential read, and up to 2500MB/s for sequential write. Sequential read performance of PCIe 4.0 SSDs is up to 40% faster than PCIe 3.0 SSDs. Prepare to enter the next generation of computing with a faster and smoother rendering of intense gaming, streaming, and graphics.

AORUS NVMe Gen4 SSD 500GB Sequential reading speed in gigabytes

AORUS NVMe Gen4 SSD
Regular PCIe 3.0 SSD

Performance (MB/s) of AORUS NVMe Gen4 SSD 1TB

50003500

Full-body copper thermal solution for amazing PCIe 4.0 SSD performance

The full body copper heatsink takes into account the heat transfer from the main components in both the front and back of the device, the controller and the NAND Flash. Copper heatsinks have 69% higher heat transfer capacity than aluminum heatsinks, giving the AORUS NVMe Gen4 SSD the best heat dissipation for read/write performance.

thermal conductivity
copper (CU)
Aluminum (AL)

401 W/mk 237 W/mc

AORUS NVMe Gen4 SSD 1TB Efficient copper heat sink design

Compared with the M.2 coated heatsink, the new efficient 27-fin copper heat spreaders add more surface area which improves heat transfer from heating sources to get thermal balance sooner. Moreover, the optimized fin array design performs significant heat exchange with any direction of air flow. Both unique design ensures the main components of the PCIe 4.0 SSD maintain proper working temperature under extremely high transfer rate.

Why is keeping SSD at lower temperatures so important?

Overheating may cause data loss. The data loss degradation factor can be a hundred times higher.
With full body copper heat spreaders, the AORUS NVMe Gen 4 hard drive can operate at lower working temperatures to improve data storage reliability. Moreover, SSDs can deliver superior performance for longer periods.

Full body copper heat diffuser
M.2 Coated Heatsink

△ T ℃ (lower is better)

The test result is based on the internal test for reference only, and the actual performance may vary according to different conditions.
16% improvement.

AORUS NVMe Gen4 SSD 1TB SSD Toolbox

The newly updated SSD Tool Box is software that gives users an overview of the SSD status and various aspects such as model name, FW version, health status and sensor temperature. Moreover, users can erase all data using the Secure Erase function. You can download SSD Tool Box from the link.

SSD Toolbox functionality may vary by model

Guaranteed quality

Superior performance
It comes from a high standard test

to express

The dimension

AORUS NVMe Gen4 SSD 1TBGB Specifications

Interface
PCI-Express 4.0×4, NVMe 1.3
Form Factor
M.2 2280
Total Capacity
1TB
NAND
3D TLC Toshiba BiCS4
External DDR Cache
DDR4 512MB
Sequential Read speed
Up to 5000 MB/s
Sequential Write speed
Up to 2500 MB/s
Random Read IOPS
up to 400k
Random Write IOPS
up to 550k
Dimension
80.5 x 11.25 x 23.5 mm
Mean time between failure (MTBF)
1.77 million hours
Power Consumption (Active)
Average: R : 5.9W; W : 4.5W
Power Consumption (Idle)
13.21mW
Temperature (Operating)
0°C to 70°C
Temperature (Storage)
-40°C to 85°C
Warranty
1. Limited 5-years or 850TBW.
2. Limited warranty based on 5 years or 850TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0)